3-Axis Brushless Gimbal w/ Motors & 32 bit Storm32 Controlller - Black

1. The control panel features and performance parameters:
(1) STM32F103RC at 72 MHz processor, processing speed is 10 times faster than 8 were, faster and more sensitive.
(2) can be installed on-board Bluetooth, by phone PID parameter adjustment, Outdoor convenient parameter adjustment Doraemon
(3) on-board gyroscope and acceleration sensor (MPU6050), double gyroscope can be achieved more action
(4) infrared led interfaces, remote camera more convenient
(5) Futaba S-Bus, supports bus receivers: Spektrum satellite port
(6) to seven-channel PWM / Sum-PPM input / output
(7) can be connected to each axis analog joystick support, head SLR handheld can use this feature
(8) additional I2C interface (I2C # 2), you can use an external sensor 6050 alternative board
(9) 3 aux interfaces
(10) Power supply voltage: 6 - 18 V or 2 - 4S
(11) motor drive current: Maximum 2A per motor per phase
(12) Size: 5cm * 5cm * 5cm, 3mm screw holes, pitch 45mm
(13) Weight: 13 g 2, PTZ basic configuration parameters
Motor Type: 2206 / 100T brushless motors: 2, 2804 / 100T brushless motor: 1 Driver board: STORM32BGC Firmware Version: o323bgc-release-v070 Hardware version: V130 Operating Voltage: 3-4S (11.1-16.8V) Operating Current: 350mA Joystick control angle: PITCH: -25 degrees +25 degrees / ROLL: -25 degrees +25 degrees / YAW: -90 degrees +90 degrees. Switch control mode: Lock / Followers Size: 80 * 80 * 100mm (L * W * H) Packaging size: 13 * 13 * 13cm Weight: 180g Gross Weight: 205g  Scope: GOPRO range of compatible cameras. Power Connector: JST and HX Suit for Camera: Gopro3, Gopro4, SJ4000, SJ6000, SJ7000,Eagle eye1+Xiaoyi and so on Suit for Airplane:1.2,3 generation F450F550.650690S,CX20V303XA650 and some others